Making the most of your chimney repairs in Vancouver


A good chimney is the sign of a good home. When looking for signs that a chimney might need to be repaired, there are a few things to check. It is best to catch any damage early in the game, or your chimney may need extensive work later on.

Check the Roof Up Close

First, check the mortar joints. It’s best to get a roofer to do this for you; it can be difficult to tell from the ground, and dangerous to look any closer yourself. If the mortar joints are beginning to deteriorate, that is a sure sign that repairs are needed.

Another sign to check is the chimney liner. Whether it’s tile or stainless steel or anything else, a good roofer will know how to inspect it for any damage. Read more from this blog:
http://bit.ly/2hLX3Am

Chimney Repair in Vancouver, BC to Get Your Fireplace Winter Ready


It is a wise decision to start preparing for the approaching winter as soon as possible. If you have an open fire or wood-burning stove, you should check your chimney now before you start using it again. Consider hiring a professional chimney repair company in Vancouver BC if you find any problems.

Cleaning the Chimney

If you haven’t used your chimney over the summer, it’s a good idea to have it cleaned. This will remove soot buildup as well as any obstacles like leaves, twigs, birds’ nests, and even birds themselves, so that you won’t have to deal with fireplace smoke inside your home when you light the season’s first fire. Read more on this article:
http://bit.ly/2feqJrT

Signs that Show You Need Chimney Repairs from Vancouver Professionals


“Out of sight, out of mind,” so goes the saying. In the context of chimney upkeep and maintenance, this unfortunately yields more trouble than it should. See, a lot of homeowners tend to neglect the health, so to speak, of their chimney structures, precisely because they don’t really see it up close. As long as the hearth is working, and the smoke is able to pass through the chimney, it’s safe to assume that all is well. But is it really?

The problem with chimney care is that unless you diligently look for possible issues on a regular basis, you’re not likely to notice it until it’s bad enough to be noticeable. By then, the damage could be already severe as to require serious chimney repairs from Vancouver companies. You don’t have to wait for the worst case scenario before you call for help, though.
http://ccrandd.ca/blog/info-articles/signs-that-show-you-need-chimney-repairs-from-vancouver-professionals.htm

Understanding the Importance of Chimney Repair and Lining in a Chimney


Chimneys are naturally built to last a long time, but that does not mean they don’t require care now and then. Failing to provide due maintenance for a chimney can be the cause of various problems in your home such as accidental fires due to damaged brickwork or health issues because of a defective flue. The liner is one part of a chimney that can lead to various structural problems down the line if it is not given the attention it deserves. Understanding the role that a flue liner plays in the system is vital so you can grasp the need for repairs when something is not right.

Remove Gases

The primary function of a flue liner is to allow the system to safely expel flue gases that are produced when combustion of various fuels takes place. Proper sizing of a flue liner is essential in generating sufficient draft in and out of a room.
http://ccrandd.ca/blog/info-articles/understanding-the-importance-of-chimney-repair-and-lining-in-a-chimney.htm

Chimney Repair: Identify Some of the Most Common Causes of Cracks


Chimneys are built to last for long, but there is a lot that can go wrong during their lifetime, particularly if maintenance is neglected. You may not even have thought about the chimney in your home or commercial property since its installation, making it appropriate to consider hiring Vancouver, BC chimney repair and maintenance services, such as Consumers Choice Roofing and Drainage.

Cracks on the inside and outside walls are some of the defects that develop over a long time of use or, in some circumstances, due to poor maintenance. After exposure to the elements, the mortar joints in the middle of stone and brick construction may begin to flake and leave cracks behind, thereby compromising the integrity of the chimney. So, what causes these cracks?
http://ccrandd.ca/blog/info-articles/chimney-repair-identify-some-of-the-most-common-causes-of-cracks.htm

Watching Out for Signs of a Deteriorating Chimney and How to Fix Them


Chimney problems can creep up on you without the slightest clue. It is very easy to forget about chimney maintenance because most people don’t use it that much. However, some of the problems that arise due to neglect can cost you a lot in repairs. The best thing is to have a professional in Vancouver to provide maintenance on a periodic basis.

One chimney issue that homeowner should keep an eye out for is deterioration. Vancouver chimney experts can provide fixes for a deteriorating flue. However, you can take better care of the flue system in your home or commercial building when you have knowledge of how systematic damages occur.

Porous Bricks

Brick houses can last a long time but only if the quality of the material is good. The same applies to the chimney. A flue constructed with porous bricks will start to deteriorate with time.
http://ccrandd.ca/blog/info-articles/watching-out-for-signs-of-a-deteriorating-chimney-and-how-to-fix-them.htm

Vancouver Chimney Repair Professionals Warn about Mold in Your Chimney


The fireplace is probably the last part of your Vancouver home that you think will be susceptible to mold growth. After all, mold thrives in the cold, damp and dark, three things which the fireplace is definitely not. So how could mold possibly grow there, right?

Unfortunately, this couldn’t be further from the truth. The reality is that it’s not uncommon to find mold growing in fireplaces. The reason mold is able to grow in that part of your home is because rainwater has the uncanny ability to reach even the most unusual places, which includes brick crevices inside your fireplace. Furthermore, damaged flashing and chimney caps let in snow and rain, making the location even more conducive to mold growth.
http://ccrandd.ca/blog/info-articles/vancouver-chimney-repair-professionals-warn-about-mold-in-your-chimney.htm